News archive

IDEAL GRP supports customers’ innovation process by offering new solutions and services for system design

System simulation

system simulation innovation shift

Innovation is increasingly taking place at the system level. In fact, over 50% of the innovation is taking place at the system level where different technologies converge. The majority of differentiating functions in an automobile – such as adaptive cruise control, lane assist, parking assistant – involves several major subsystems, electronics, software, as well as dynamics and physics of the vehicle. Implementing these functionalities requires a new, systemic approach.

Continue Reading

Industry insight with IDEAL GRP'S Dick Nyström

HAN VET HUR ”PLM-SLIPSTENEN” SKA DRAS.
Det är idag knappast intressant att bara sälja in nya programlösningar i parti och minut. Den tiden är försvunnen, säger Dick Nyström, ansvarig för strategisk affärsutveckling i IDEAL GRP, Europas största enskilda PLM- och automationspartner till Siemens Digital Industries, i dagens artikel på PLM&ERP News. 
Dagens företag vill ha lösningar som gör att helheten i produktframtagningskedjan fungerar, konstaterar Nyström. Bara en mjukvara, eller bara en konsulttjänst, löser kanske inte problemet, utan här kan man behöva nytt helhetstänkande, etablera ny metodik och bygga lösningsorienterat nätverkande, där flera aktörer tillsammans kan lösa utmaningar eller problem.
– Vi talar om sånt som digitala tvillingar och trådar, IIoT, produktionssimulering, lågkod-baserade appar och processhantering, som knyter ihop och ger kontroll över tillverkningen. Sånt kräver förståelse för hur det hela ska och kan sjösättas i verkligheten på verkstadsgolvet och då anpassat till varje kunds eller användares individuella behov. Det är vi på partnersidan som känner kunderna och vet vad som kan förbättras och hur det ska göras för att skapa bra produktionsekonomi hos dem, säger Nyström.
Läs mer om hur han och IDEAL GRPs CEO, Jaakko Hartikainen, ser på framtiden för verkstadsindustrin och vad som behövs för att vässa positionerna. 

dick nystrom 2

Nordiska Siemens-partnern IDEAL GRP redan i Europatopp … men nye CEOn ser ännu ett lyft på vägen mot Industri 4.0 | PLM & ERP News (plm-erpnews.se)

Take part of the in-depth articles in Swedish within CAD, CAM and Additive Manufacturing that were published in The Machine Operator

New products are being launched on the market at an accelerating pace. Customers demand products that satisfy their specific needs. Rapidly changing markets require increasing flexibility and the constant pursuit of increased efficiency requires shorter development times and more efficient use of resources and energy. All this without loss of quality – or even with higher.

Take part of the in-depth articles in Swedish within CAD, CAM and Additive Manufacturing that were published in The Machine Operator written by Joakim Simons, Henrik Jaxner and Christoffer Rognseth, IDEAL GRP

Please read the articles here



Breakfast awareness - where engineering meets tomorrow

simcenter beating heart

Dear customer, we at IDEAL GRP are delighted to serve you 5 breakfast seminars, with a focus on the Scandinavian market, showcasing Siemens CAE Software simulation tools. Each seminar is a stand-alone session, so no need to attend all to get the insight you want to gain. We trust these sessions will give you the necessary insight to evaluate if these tools can benefit you in your product development process. At the end of each session, we will have a Q&A session, where a Siemens expert together with us will answer your questions. Hope to see you there – online with your breakfast!

Series of 5 FREE seminars – one every week on Friday Morning 08:30

Length 30 minutes utilizing Teams. A technical specialist from Siemens/IDEAL GRP does a 15-minute demonstration, a sales representative from IDEAL GRP does 5 minutes introduction and 10 minutes Q&A session at the end.

 

  • System Simulation, 5 November, 08.30 - 09.00 CET

    Simcenter System Simulation solutions include tools that can help you from early design until final performance validation and controls calibration.

    • Electrical System Simulation
    • Fluid System Simulation
    • Mechanical System Simulation
    • Model-based Reliability, Availability, Maintainability and Safety (RAMS)
    • Power Electronics Field Lifetime Testing
    • Propulsion System Simulation
    • ROM Builder
    • Thermal Management System Simulation
    • System simulation power from everywhere
  • Mechanical Simulation, 12 November, 08.30 - 09.00 CET

    Mechanical simulation refers to all 3D computer-aided engineering (CAE) applications that are dictated by the mechanical properties of a product, such as noise and vibration analysis, acoustics, fatigue analysis, multi-body dynamics and crash simulation. The applied technologies are typically based on the relevant physics and may include finite element analysis, boundary element analysis, multi-body dynamics or similar. Engineers primarily use mechanical simulation during the detailed engineering phase, to study and predict how the product will behave in real life, using application-specific models.

  • Computational fluid Dynamics (CFD), 19 November, 08.30 - 09.00 CET

    Simcenter FLOEFD software puts the power of CFD simulation in your hands. Use it directly in NX, Creo, CATIA V5 or Solid Edge in order to explore the full potential of your ideas quickly, without disrupting your design process.

    Understand the impact of changes in the geometry or boundary conditions on the results effortlessly, conduct fast and frequent what-if analysis, and generate insightful reports inside your preferred CAD platform. Built on a foundation of intelligent, fast and accurate technology, Simcenter FLOEFD can help reduce the overall simulation time.

  • Electromagnetics and electronics, 26 November, 08.30 - 09.00 CET
    • E/E Systems Development
    • Embedded software
    • IC Synthesis, Design & Verification
    • PCB & IC Package Design
    • System Modeling & Design Management
  • Physical Testing, 3 December, 08.30 - 09.00 CET

    Simcenter Testing Solutions deliver critical insights to innovate smart products, increase testing productivity and efficiency, maintain utmost quality, enhance team collaboration and engineering flexibility, close the loop with simulation, and ultimately lower cost of ownership.

 

REGISTER FOR THE SEMINARS HERE

 

 



Atos expands its manufacturing capabilities with the acquisition of IDEAL GRP in the Nordics

Paris (France), July 27, 2021 – Atos announced today that it has completed the acquisition of IDEAL GRP, a Product Lifecycle Management (PLM) system integrator and platinum-level solution partner of Siemens Digital Industries Software, headquartered in Finland. IDEAL GRP offers consulting, integration, software and maintenance services for businesses in the manufacturing sector. The acquisition will add a highly skilled team of approximately 100 experts to Atos with double platinum status.

Continue Reading

With market-leading technology and high process competence, Siemens Digital Industries partner IDEAL GRP's CEO, Jaakko Hartikainen, and his employees are well-positioned in the Nordic & Baltic PLM market.

The company is Siemens' largest European partner in this area and Jaakko Hartikainen looks forward to the future. "Everything looks promising," he said. “Corona times have been tough for everyone, but in 2021 we have seen a turnaround and we expect to reach around 20 percent in organic growth during the year and revenues that land on a bit over 20 million euros, if the development goes according to plan. We are more than 100 employees today, but we plan for another 20-30 new additions to our team and have open vacancies currently.”

jaakko hartikainen ratt

Nordiska Siemens-partnern IDEAL GRP redan i Europatopp … men nye CEOn ser ännu ett lyft på vägen mot Industri 4.0 | PLM & ERP News (plm-erpnews.se)

Introducing Simcenter Femap 2021: The next evolution in the high-performance FEA simulation tool

Simcenter Femap version 2021.2 is now available for download

Simcenter™ Femap™ is part of the Xcelerator™ portfolio, the comprehensive and integrated portfolio of software and services from Siemens Digital Industries Software.

Watch the Simcenter Femap 2021.2. launch video!

What’s New in Simcenter Femap 2021?

The enhancements in Simcenter Femap 2021 are aimed at streamlining and improving the FEA process, maximizing FEA efficiency, and further enabling users to edit and import/re-use mesh-centric FEA models of complex products and systems. 

Continue Reading

Conseptas addresses the growing customer needs with electronic thermal design optimization solutions, coupled with broad expertise spanning decades

Conseptas decided to utilise world-leading 3D computational fluid dynamics solutions, which predict airflow and heat transfer in and around electronic equipment, including the coupled effects of conduction, convection, and radiation. The company chose Siemens’ solutions Simcenter Flotherm and Simcenter Flotherm XT as their engineering simulation tools to support their growth. The solutions are used to model, understand, iterate, and realize the growing demands of customers’ thermal designs and to optimize the capabilities of their devices.

Continue Reading

Give us a few minutes! We would love to tell you more about our solutions.

Send us your details and we will contact you. Thanks!

Invalid Input
Invalid Input
Invalid Input
Invalid Input
Invalid Input

Selection of Customer CASES

  • Mekverken Tool saves time and money
  • TAMK
  • TOMRA - Rethink, Remain & Resource
  • Jucat
  • Polar Electro
  • Seco Tools
  • Bronto Skylift
  • Laitila Tooling
  • Streamlined work for Tooltec Trestad
  • Suhmuran Metalli
  • Miror – Creating emotional engagement
  • Toijala Works
  • Bronto Skylift
  • Turku AMK
  • SeAMK
  • University of Oulu
  • Hesplan Oy
  • Konecranes
  • Bronto Skylift
  • SeAMK
  • Alpha Aqua
  • PBH Teknik - CNC machining for the high technology industry
  • TAMK
  • Harju Elekter Groups
  • Logset Oy
  • Jucat